I've started playing with some basic tutorial/toy electronics stuff using the Arduino platform and the "SparkFun Arduino Inventors' Kit" (hardly "inventors'", but anyway...) after picking it up as part of an order from the awesome outfit Little Bird Electronics. While generally good, I've hit an interesting issue with the kit that's worth documenting for anyone else who has it.
The short version: If you're using the SparkFun kit that specifies a 10kΩ resistor and the test circuit doesn't work (the motor won't spin) you might need to use a lower valued resistor between the transistor and pin 9 of the Arduino board.
If this is the case, you'll find that when you flick the motor's drive around with your fingers so it spins, sometimes it'll spin down slowly and sometimes it'll stop suddenly, depending on whether the Arduino is currently trying to drive it or not.
Check for all the usual errors before assuming the issue described here is what's wrong with your circuit. You might've reversed the flyback diode, made a poor connection on a power rail, etc etc.
